Cisco switch: Unterschied zwischen den Versionen

Aus xinux.net
Zur Navigation springen Zur Suche springen
 
(45 dazwischenliegende Versionen von 2 Benutzern werden nicht angezeigt)
Zeile 3: Zeile 3:
 
=Configuration dialog=
 
=Configuration dialog=
 
*[[Cisco-switch-initial configuration dialog?]]
 
*[[Cisco-switch-initial configuration dialog?]]
 
 
=Grundkonfiguration=
 
=Grundkonfiguration=
 
*[[Cisco Switch Grundkonfiguration]]
 
*[[Cisco Switch Grundkonfiguration]]
 +
=Cisco Layer 2 oder Layer 3=
 +
*[[Cisco Layer 2 oder Layer 3]]
 +
 
=Interface Konfiguration=
 
=Interface Konfiguration=
 
*[[Cisco Interface Konfiguration]]
 
*[[Cisco Interface Konfiguration]]
 
=Show Befehle=
 
=Show Befehle=
 
*[[Cisco Showbefehle]]
 
*[[Cisco Showbefehle]]
 
 
=Webinterface=
 
=Webinterface=
 
*[[Cisco Webinterface]]
 
*[[Cisco Webinterface]]
=Flash=
+
=Filesystems=
*[[Cisco Switch Flash]]
+
*[[Cisco Switch Filesystems]]
 +
=Ssh und Telnet=
 +
*[[Cisco Switch Ssh und Telnet]]
 +
=Vlans Grundlagen=
 +
*[[Cisco Vlans Grundlagen]]
 +
=Vlan Trunking=
 +
*[[Cisco Vlan Trunking]]
  
=Dateisystem anzeigen=
+
=Vlans=
*c3750g#show file systems
+
*[[Cisco Vlans]]
=Inhalt von einer Datei anzeigen=
+
=DHCP on Vlans=
*c3750g#more  config.text
+
*[[Cisco DHCP on Vlans]]
 
+
*[[Cisco DHCP relay]]
=Anzeige Flash=
 
*Switch#show flash
 
Directory of flash:/
 
 
    2  -rwx        3096  Jan 26 2016 15:22:16 +00:00  multiple-fs
 
    3  -rwx        1590  Mar 1 1993 00:44:44 +00:00  config.old
 
  457  drwx        192  Mar 1 1993 00:35:33 +00:00  c3750-ipbasek9-mz.122-55.SE6
 
    84  -rwx        1940  Jan 26 2016 15:22:16 +00:00  private-config.text
 
    85  -rwx        3021  Jan 26 2016 15:22:16 +00:00  config.text
 
 
 
=Anzeige Flash mit dir=
 
*Switch#dir flash:
 
<pre>
 
Directory of flash:/
 
 
 
    2  -rwx        3096  Jan 26 2016 15:22:16 +00:00  multiple-fs
 
    3  -rwx        1590  Mar 1 1993 00:44:44 +00:00  config.old
 
  457  drwx        192  Mar 1 1993 00:35:33 +00:00  c3750-ipbasek9-mz.122-55.SE6
 
  84  -rwx        1940  Jan 26 2016 15:22:16 +00:00  private-config.text
 
  85  -rwx        3021  Jan 26 2016 15:22:16 +00:00  config.text
 
</pre>
 
 
 
=Anzeige Directory=
 
*Switch#dir c3750-ipbasek9-mz.122-55.SE6 
 
<pre>
 
Directory of flash:/c3750-ipbasek9-mz.122-55.SE6/ 
 
  
    4  drwx        1792  Mar 1 1993 00:28:51 +00:00  html
+
=Native Vlan=
  82  -rwx    12098384  Mar 1 1993 00:35:33 +00:00  c3750-ipbasek9-mz.122-55.SE6.bin
+
*[[Cisco Native Vlan]]
  83  -rwx        681  Mar 1 1993 00:35:33 +00:00  info
+
=VLAN-Trunking Protocol=
</pre>
+
*[[Cisco VLAN-Trunking Protocol]]
 +
=Vlan Beschränkung=
 +
*[[Cisco Vlan Beschränkung]]
 +
=Delete Config=
 +
*[[Cisco Delete Config]]
 +
=Cisco Switch Port Security=
 +
*[[Cisco Switch Port Security]]
  
=Ios sichern=
+
=Spanning Tree Protocol=
*Switch#copy  flash:/c3750-ipbasek9-mz.122-55.SE6/c3750-ipbasek9-mz.122-55.SE6.bin tftp://192.168.240.200/cisco/
+
*[[Cisco Spanning Tree Protocol]]
Address or name of remote host [192.168.240.200]?
+
=ACLs=
Destination filename [cisco/c3750-ipbasek9-mz.122-55.SE6.bin]?
+
*[[Cisco ACLs]]
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 
=Konfig sichern=
 
*Switch#copy running-config tftp://192.168.240.200/cisco/c3750g.conf
 
Address or name of remote host [192.168.240.200]?
 
Destination filename [cisco/c3750g.conf]?
 
!!
 
4356 bytes copied in 1.409 secs (3092 bytes/sec
 
=Telnet aktivieren=
 
*Switch#configure terminal
 
*Switch(config)#aaa new-model
 
*Switch(config)#username admin password 0 geheim
 
*Switch(config)#line vty 0 4
 
*Switch(config-line)#transport input telnet
 
=SSH aktivieren=
 
*Switch(config)#ip domain-name xinux.org
 
*Switch(config)#hos
 
*Switch(config)#hostname c3750g
 
*c3750g(config)#
 
*c3750g(config)#crypto key generate rsa
 
<pre>
 
The name for the keys will be: c3750g.xinux.org
 
Choose the size of the key modulus in the range of 360 to 2048 for your
 
  General Purpose Keys. Choosing a key modulus greater than 512 may take
 
  a few minutes.
 
  
How many bits in the modulus [512]:
+
=Link Aggregation=
% Generating 512 bit RSA keys, keys will be non-exportable...[OK]
+
*[[Link Aggregation]]
</pre>
+
*[[Cisco LACP Linux]]
*c3750g(config)#ip ssh time-out 60
+
*[[Cisco Etherchannel]]
*c3750g(config)#ip ssh authentication-retries 2
 
=Abschalten von telnet=
 
*c3750g#configure terminal
 
Enter configuration commands, one per line.  End with CNTL/Z.
 
*c3750g(config)#line vty 0 4
 
*c3750g(config-line)#transport input ssh
 
=Switche anzeigen=
 
*c3750g#show switch
 
Switch/Stack Mac Address : 0012.d9a3.4400
 
                                          H/W  Current
 
Switch#  Role  Mac Address    Priority Version  State
 
----------------------------------------------------------
 
*1      Master 0012.d9a3.4400    1      0      Ready             
 
  3      Member 0000.0000.0000    0      0      Provisioned
 
  
=Löschen von Dateien=
+
=Cisco Switch sicher einrichten=
*c3750g#dir  flash: 
+
*[http://www.nwlab.net/know-how/Cisco/ Sicherheit]
<pre>
 
Directory of flash:/
 
  
    2  -rwx        4501  Jan 26 2016 18:03:22 +00:00  c3750g.conf
+
=LLDP=
    3  -rwx        1590  Mar 1 1993 00:44:44 +00:00  config.old
+
*[[Cisco LLDP]]
  457  drwx        192  Mar 1 1993 00:35:33 +00:00  c3750-ipbasek9-mz.122-55.SE6
+
=Phone on Switch=
  84  -rwx        3096  Jan 26 2016 16:40:08 +00:00  multiple-fs
+
*[[Cisco Phone on Switch]]
  85  -rwx        3019  Jan 26 2016 16:40:08 +00:00  private-config.text
+
=Cisco Switch an Esxi=
  86  -rwx        3166  Jan 26 2016 16:40:08 +00:00  config.text
+
*[[Cisco Switch an Esxi]]
  87  -rwx        4501  Jan 26 2016 18:06:51 +00:00  c3750g.cfg
+
=Cisco Portmirroring=
  88  -rwx    1556480  Jan 26 2016 18:08:11 +00:00  ccpexpressAdmin27.tar
+
*[[Cisco Portmirroring]]
 +
=Cisco Radiusanbindung=
 +
*[[Cisco Radiusanbindung]]
  
15998976 bytes total (1767936 bytes free)
+
=Cisco 802.1X=
</pre>
+
*[[Cisco 802.1X]]
*c3750g#delete  flash:/c3750g.conf
 
Delete filename [c3750g.conf]
 
Delete flash:/c3750g.conf? [confirm]
 
  
=md5 verifizieren=
+
=Cisco Mac Authentication Bypass=
*c3750g#verify /md5 flash:/c3750-ipbasek9-mz.122-55.SE6/c3750-ipbasek9-mz.122-55.SE6.bin
+
*[[Cisco Mac Authentication Bypass]]
=Modify Switch Boot path-list testen=
 
*c3750g#boot system switch all flash:/c3750-ipbasek9-mz.122-55.SE6/c3750-ipbasek9-mz.122-55.SE6.bin
 
=Boot konfig anzeigen=
 
*c3750g#show boot
 
<pre>
 
BOOT path-list      : flash:c3750-ipbasek9-mz.122-55.SE6/c3750-ipbasek9-mz.122-55.SE6.bin
 
Config file        : flash:/config.text
 
Private Config file : flash:/private-config.text
 
Enable Break        : no
 
Manual Boot        : no
 
HELPER path-list    :
 
Auto upgrade        : yes
 
Auto upgrade path  :
 
NVRAM/Config file
 
      buffer size:  524288
 
Timeout for Config
 
          Download:    0 seconds
 
Config Download
 
      via DHCP:      disabled (next boot: disabled)
 
</pre>
 
  
=Vlans=
+
=Policy-Based Routing=
*[[Cisco Vlans]]
+
*[[Cisco Policy-Based Routing]]
 +
=Cisco Switch Diagnose=
 +
*[[Cisco Switch Diagnose]]
  
 +
=Kurzreferenz=
 +
*http://kohnlehome.de/netz/Switchgrundkonfiguration.pdf
 
=Links=
 
=Links=
 
  
 
*http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/12-2_55_se/configuration/guide/3750xscg/swvlan.html
 
*http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/12-2_55_se/configuration/guide/3750xscg/swvlan.html
 
*http://www.cisco.com/c/en/us/support/docs/switches/catalyst-3750-series-switches/45002-intervlan3750-45002.html
 
*http://www.cisco.com/c/en/us/support/docs/switches/catalyst-3750-series-switches/45002-intervlan3750-45002.html
 
*http://www.thegeekstuff.com/2011/06/upgrade-cisco-ios-image/
 
*http://www.thegeekstuff.com/2011/06/upgrade-cisco-ios-image/
 +
*http://computernetworkingnotes.com/switching-vlan-stp-vtp-dtp-ether-channels/basic-switch-configurations.html
 +
*http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750/software/release/12-2_55_se/commmand/reference/3750cr/cli2.html
 +
*http://www.cisco.com/c/en/us/support/docs/switches/catalyst-4500-series-switches/69632-configuring-cat-ip-phone.html
 +
*http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/12-2SXF/native/configuration/guide/swcg/voip.html?referring_site=bodynav#wp1046284
 +
*http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/12-2SXF/native/configuration/guide/swcg/voip.html?referring_site=bodynav#wp1030860
 +
*http://www.cisco.com/en/US/docs/ios/12_4t/ip_addr/configuration/guide/htdhcpre.html

Aktuelle Version vom 5. Februar 2020, 12:04 Uhr

Grundlegendes

Configuration dialog

Grundkonfiguration

Cisco Layer 2 oder Layer 3

Interface Konfiguration

Show Befehle

Webinterface

Filesystems

Ssh und Telnet

Vlans Grundlagen

Vlan Trunking

Vlans

DHCP on Vlans

Native Vlan

VLAN-Trunking Protocol

Vlan Beschränkung

Delete Config

Cisco Switch Port Security

Spanning Tree Protocol

ACLs

Link Aggregation

Cisco Switch sicher einrichten

LLDP

Phone on Switch

Cisco Switch an Esxi

Cisco Portmirroring

Cisco Radiusanbindung

Cisco 802.1X

Cisco Mac Authentication Bypass

Policy-Based Routing

Cisco Switch Diagnose

Kurzreferenz

Links