Cisco LLDP
Zur Navigation springen
Zur Suche springen
Aktivieren
- switch-rot#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
- switch-rot(config)#lldp run
- switch-rot(config)#end
Anzeigen
- switch-rot#show lldp
Feb 9 08:57:21.592: %SYS-5-CONFIG_I: Configured from console by console switch-rot#show lldp ne switch-rot#show lldp neighbors Capability codes: (R) Router, (B) Bridge, (T) Telephone, (C) DOCSIS Cable Device (W) WLAN Access Point, (P) Repeater, (S) Station, (O) Other Device ID Local Intf Hold-time Capability Port ID HPE Gi1/0/8 121 B,R GigabitEthernet1/0/48 HPE Gi1/0/7 121 B,R GigabitEthernet1/0/47 Total entries displayed: 2