PFSense Konsolen Netzwerkeinstellungen
Zur Navigation springen
Zur Suche springen
Die Idee
- Grundsetup der Netzwerkschnittstellen
- Auswahl WAN, LAN und OPT (später DMZ)
- Default Gateway
- DHCP Grundkonfiguration
- PFSense danach über das Lan Interface per Web administrierbar
Erstes Setup
- Should VLANs be set up now [y|n]?n
- Enter the WAN interface name or 'a' for auto-detection
(vtnet0 vtnet1 vtnet2 or a): vtnet0
- Enter the LAN interface name or 'a' for auto-detection
NOTE: this enables full Firewalling/NAT mode. (vtnet1 vtnet2 a or nothing if finished): vtnet1
- Enter the Optional 1 interface name or 'a' for auto-detection
(vtnet2 a or nothing if finished): vtnet2
WAN -> vtnet0 LAN -> vtnet1 OPT1 -> vtnet2
- Do you want to proceed [y|n]? y
Grundeinstellung
KVM Guest - Netgate Device ID: 2151ca91e52d2dc565fc *** Welcome to pfSense 2.5.2-RELEASE (amd64) on pfSense *** WAN (wan) -> vtnet0 -> v4/DHCP4: 194.59.156.217 LAN (lan) -> vtnet1 -> v4: 192.168.1.1/24 OPT1 (opt1) -> vtnet2 -> 0) Logout (SSH only) 9) pfTop 1) Assign Interfaces 10) Filter Logs 2) Set interface(s) IP address 11) Restart webConfigurator 3) Reset webConfigurator password 12) PHP shell + pfSense tools 4) Reset to factory defaults 13) Update from console 5) Reboot system 14) Enable Secure Shell (sshd) 6) Halt system 15) Restore recent configuration 7) Ping host 16) Restart PHP-FPM 8) Shell
- Enter an option:2
- 2) Set interface(s) IP address
- Entsprechned für die anderen Netze
Resultat
KVM Guest - Netgate Device ID: 2151ca91e52d2dc565fc *** Welcome to pfSense 2.5.2-RELEASE (amd64) on pfSense *** WAN (wan) -> vtnet0 -> v4: 194.59.156.201/27 LAN (lan) -> vtnet1 -> v4: 192.168.151.1/24 OPT1 (opt1) -> vtnet2 -> v4: 192.168.101.1/24 0) Logout (SSH only) 9) pfTop 1) Assign Interfaces 10) Filter Logs 2) Set interface(s) IP address 11) Restart webConfigurator 3) Reset webConfigurator password 12) PHP shell + pfSense tools 4) Reset to factory defaults 13) Update from console 5) Reboot system 14) Enable Secure Shell (sshd) 6) Halt system 15) Restore recent configuration 7) Ping host 16) Restart PHP-FPM 8) Shell Enter an option: