Wireguard: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Zeile 39: | Zeile 39: | ||
Endpoint = 10.84.252.45:50002 | Endpoint = 10.84.252.45:50002 | ||
</pre> | </pre> | ||
+ | |||
+ | =Systemctl= | ||
+ | *systemctl enable wg-quick@wg0.service | ||
+ | *systemctl start wg-quick@wg0.service | ||
+ | *systemctl status wg-quick@wg0.service | ||
+ | *systemctl stop wg-quick@wg0.service | ||
+ | |||
=Links= | =Links= | ||
*https://www.thomas-krenn.com/de/wiki/Ubuntu_18.04_als_WireGuard_VPN_Client_konfigurieren | *https://www.thomas-krenn.com/de/wiki/Ubuntu_18.04_als_WireGuard_VPN_Client_konfigurieren | ||
*https://wiki.ubuntuusers.de/WireGuard/ | *https://wiki.ubuntuusers.de/WireGuard/ |
Version vom 17. Dezember 2019, 15:30 Uhr
Two Nodes
- schnubel
- gustavo
Installation
- sudo add-apt-repository ppa:wireguard/wireguard
- sudo apt install wireguard
Create Keys
- cd /etc/wireguard
- wg genkey > private.key
- wg pubkey > public.key < private.key
- wg genpsk > psk.key
Configuration
- schnubel
- cat /etc/wireguard/wg0.conf
[Interface] Address = 10.84.252.45/32 PrivateKey = mLwHm48y8fRQrez3XrUzL3rSqgy51GwVj+W3/JuVxm4= ListenPort = 50002 [Peer] PublicKey = ULq8e5vYRa2s4phsRBkzOvRC8g819xM0/44rII6wqTg= PresharedKey = 7zyF6E3dQtpiJHBhOix46/MsSkHk2FukYQtZ3rAjJtg= AllowedIPs = 10.83.33.0/24 Endpoint = 10.84.252.33:50002
- gustavo
- cat /etc/wireguard/wg0.conf
[Interface] Address = 10.84.252.33/32 PrivateKey = OJYseijxQRCfpFeMe3052mfDV6lhvOxpRLeVm9C520Y= ListenPort = 50002 [Peer] PublicKey = C1YoH/VxFLS5PjkhAxi13lG/Uq6jDwxSB5xMVHzm6ys= PresharedKey = 7zyF6E3dQtpiJHBhOix46/MsSkHk2FukYQtZ3rAjJtg= AllowedIPs = 10.83.45.0/24 Endpoint = 10.84.252.45:50002
Systemctl
- systemctl enable wg-quick@wg0.service
- systemctl start wg-quick@wg0.service
- systemctl status wg-quick@wg0.service
- systemctl stop wg-quick@wg0.service