WLAN AccessPoint: Unterschied zwischen den Versionen

Aus xinux.net
Zur Navigation springen Zur Suche springen
Zeile 1: Zeile 1:
−
= Vorbereitungen =
+
=Interfaces=
−
== USB Passtrough auf VMWare ESXi ==
+
<pre>
−
;Eigenschaften -> Hardware:
+
auto br0
−
:Hinzufügen
+
iface br0 inet static
−
::"USB-Controller"
+
address 10.81.3.5
−
::OK
+
netmask 255.255.255.0
−
:Hinzufügen
+
gateway 10.81.0.1
−
::"USB-Gerät"
+
dns-nameservers 10.80.0.2 10.80.0.3
−
::"USB-Hostgerät" auswählen
+
dns-search xinux.lan tuxmen.de
−
::OK
+
pre-up /etc/init.d/hostapd stop
 +
bridge_ports eth0
 +
bridge_stp off
 +
bridge_fd 0
 +
bridge_maxwait 0
 +
up /etc/init.d/hostapd start
 +
</pre>
 +
=hostapd=
 +
<pre>
 +
interface=wlan0
 +
bridge=br0
 +
driver=nl80211
 +
ssid=CHEWINGGUM
 +
hw_mode=g
 +
channel=6
 +
macaddr_acl=0
 +
auth_algs=1
 +
ignore_broadcast_ssid=0
 +
wpa=2
 +
wpa_passphrase=9twin-towers11
 +
wpa_key_mgmt=WPA-PSK
 +
wpa_pairwise=TKIP
 +
rsn_pairwise=CCMP
 +
</pre>
  
−
== WLAN Treiber ==
 
−
=== rt73usb Firmware compilieren ===
 
−
cd /usr/src/
 
−
<nowiki>wget http://www.ralinktech.com.tw/download.php?t=U0wyRnpjMlYwY3k4eU1ERXhMekF5THpJMEwyUnZkMjVzYjJGa01qa3dORGsyTnpZMU9TNWllakk5UFQweU1ERXhYekF5TVRCZlVsUTNNMTlNYVc1MWVGOVRWRUZmUkhKMk1TNHhMakF1TlE9PUM= -O 2011_0210_RT73_Linux_STA_Drv1.1.0.5.bz2</nowiki>
 
−
tar -xvjf 2011_0210_RT73_Linux_STA_Drv1.1.0.5.bz2
 
−
cd 2011_0210_RT73_Linux_STA_Drv1.1.0.5/Module
 
−
make
 
−
cp -v rt73.bin /lib/firmware/
 
  
−
== Bridge ==
 
−
aptitude install bridge-utils
 
−
/etc/network/interfaces
 
−
auto br0
 
−
iface br0 inet static
 
−
# pre-up brctl addbr br0
 
−
        pre-up /etc/init.d/hostapd stop
 
−
        address 172.28.6.2
 
−
        netmask 255.255.255.0
 
−
        gateway 172.28.6.1
 
−
        bridge_ports eth1 wlan0
 
−
        bridge_stp off
 
−
        bridge_fd 0
 
−
        bridge_maxwait 0
 
−
        up /etc/init.d/hostapd start
 
−
 
−
= AccessPoint Konfigurieren =
 
−
== hostapd ==
 
−
aptitude install hostapd
 
−
/etc/default/hostapd
 
−
DAEMON_CONF="/etc/hostapd/hostapd.conf"
 
−
/etc/hostapd/hostapd.conf
 
−
interface=wlan0                                    # WLAN Device
 
−
bridge=br0                                        # Bridge Device, falls WLAN via Bridge genutzt wird
 
−
driver=nl80211                                    # Treiber
 
−
hw_mode=g                                          # Aktivierung von 802.11g
 
−
ssid=<SSID-NAME>                                  # Netwerk Name
 
−
channel=2                                          # Kanal
 
−
wpa=2                                              # WPA Version
 
−
wpa_passphrase=<SECURE PASSWORD>                  # Passwort
 
−
wpa_key_mgmt=WPA-PSK
 
−
wpa_pairwise=CCMP
 
−
wpa_group_rekey=600
 
−
wpa_gmk_rekey=86400
 
−
 
−
== DHCP ==
 
−
 
−
== wpa_supplicant ==
 
  
 
= Links =
 
= Links =
 +
* https://wiki.ubuntuusers.de/Netzwerkbr%C3%BCcke/#Bruecken-in-drahtlose-Netze
 
* http://ubuntuforums.org/showthread.php?t=400236&page=118
 
* http://ubuntuforums.org/showthread.php?t=400236&page=118
 
* http://www.linux.com/learn/tutorials/442417-create-a-secure-linux-based-wireless-access-point
 
* http://www.linux.com/learn/tutorials/442417-create-a-secure-linux-based-wireless-access-point

Version vom 10. Juli 2017, 10:24 Uhr

Interfaces

auto br0
iface br0 inet static
 address 10.81.3.5
 netmask 255.255.255.0
 gateway 10.81.0.1
 dns-nameservers 10.80.0.2 10.80.0.3
 dns-search xinux.lan tuxmen.de
 pre-up /etc/init.d/hostapd stop
 bridge_ports eth0
 bridge_stp off
 bridge_fd 0
 bridge_maxwait 0
 up /etc/init.d/hostapd start

hostapd

interface=wlan0
bridge=br0
driver=nl80211
ssid=CHEWINGGUM
hw_mode=g
channel=6
macaddr_acl=0
auth_algs=1
ignore_broadcast_ssid=0
wpa=2
wpa_passphrase=9twin-towers11
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP


Links

Abgerufen von „https://xinux.net/index.php?title=WLAN_AccessPoint&oldid=13687“