Unicornscan
Version vom 11. November 2018, 15:00 Uhr von Thomas.will (Diskussion | Beiträge) (Die Seite wurde neu angelegt: „=Example= *unicornscan -mT -Iv -r 1000 94.130.248.217:a <pre> adding 94.130.248.217/32 mode `TCPscan' ports `a' pps 1000 using interface(s) eth0 scaning 1.00e+…“)
Example
- unicornscan -mT -Iv -r 1000 94.130.248.217:a
adding 94.130.248.217/32 mode `TCPscan' ports `a' pps 1000 using interface(s) eth0 scaning 1.00e+00 total hosts with 6.55e+04 total packets, should take a little longer than 1 Minutes, 12 Seconds TCP open 94.130.248.217:7777 ttl 64 TCP open 94.130.248.217:22 ttl 64 TCP open 94.130.248.217:8472 ttl 64 TCP open 94.130.248.217:50505 ttl 64 TCP open 94.130.248.217:389 ttl 64 TCP open 94.130.248.217:636 ttl 64 sender statistics 997.9 pps with 65536 packets sent total listener statistics 131110 packets recieved 0 packets droped and 0 interface drops TCP open ssh[ 22] from 94.130.248.217 ttl 64 TCP open ldap[ 389] from 94.130.248.217 ttl 64 TCP open ldaps[ 636] from 94.130.248.217 ttl 64 TCP open cbt[ 7777] from 94.130.248.217 ttl 64 TCP open unknown[ 8472] from 94.130.248.217 ttl 64 TCP open unknown[50505] from 94.130.248.217 ttl 64