Multicast Routing
Version vom 26. Juli 2011, 08:09 Uhr von Pascal (Diskussion | Beiträge)
Nutzbare Daemons
- pimd - multicast routing daemon (PIMv2)
- smcroute - static multicast router daemon
- mrouted
pimd HowTo
- Ensure the kernel has the following enabled by looking in the .config
CONFIG_IP_MULTICAST CONFIG_IP_PIMSM_V2 CONFIG_IP_MROUTE
the NETLINK-related options
- If not, enable it, recompile the kernel and reboot
- turn on IP forwarding
echo 1 >/proc/sys/net/ipv4/ip_forwarding
- assuming devices are eth0 and eth1, add multicast to the routing table
route add -net 224.0.0.0/4 dev eth0 route add -net 224.0.0.0/4 dev eth1
- start the pimd daemon