Weiter geht es
- Wir bauen einen Cisco Router ein
- Dieser kommt an unser Transit Netz
- Wir Nutzen hier GigabitEthernet1
- IP 2a02:24d8:71:2444::2
- Wir stellen die Default Route auf 2a02:24d8:71:2444::1
- Wir testen
Schaubild
Einrichtung
Hostname
- configure terminal
- hostname cisco-router
- end
Forwarding von IPv6 Traffic
- configure terminal
- ipv6 unicast-routing
- ip routing
- end
Zurordnung zum Interface
GigabitEthernet1
- configure terminal
- interface GigabitEthernet1
- description to-opnsense
- ip address 192.168.44.2 255.255.255.0
- negotiation auto
- ipv6 address 2A02:24D8:71:3034::2/64
- exit
- end
GigabitEthernet2
- configure terminal
- interface GigabitEthernet2
- description lan
- ip address 192.168.45.2 255.255.255.0
- negotiation auto
- ipv6 address 2A02:24D8:71:3035::2/64
- ipv6 nd prefix default no-advertise
- ipv6 nd ra suppress all
- exit
- end
Test
- ping ipv6 2A02:24D8:71:3034::1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2A02:24D8:71:3034::1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
Default Route
- configure terminal
- ipv6 route ::/0 2a02:24d8:71:3030::1
- ip route 0.0.0.0 0.0.0.0 192.168.44.1
- end
Testen der Defaultroute
- ping ipv6 2001:4860:4860::8888
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2001:4860:4860::8888, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/7 ms
IPv6 Nameserver
- configure terminal
- ip name-server 2A02:24D8:71:3030::1
- end
Nameserver Test
Translating "google.de"...domain server (2A01:4F8:C17:2CC5::1) [OK]
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2A00:1450:4001:827::2003, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/3/6 ms