Fritz unter Ubuntu 10.04
Installation
Vorausgesetzte Pakete installieren
apt-get install build-essential capiutils libcapi20-3 libcapi20-dev pppdcapiplugin linux-headers-$(uname -r) dkms
Fritz fcpci herunterladen https://belug.de/~lutz/pub/fcpci/
wget --no-check-certificate https://belug.de/~lutz/pub/fcpci/fritz-fcpci-src-2.6.31_untested.tar.bz2
Blacklist anpassen
echo "blacklist avmfritz" > /etc/modprobe.d/blacklist-avmfritz.conf
Neustarten
reboot ....
Fritz fcpci nach /usr/src entpacken
tar -xvjf fritz-fcpci-src-2.6.31_untested.tar.bz2 -C /usr/src
Ins Verzeichniss wechseln
cd /usr/src/fritz-fcpci-2.6.31/lib
Link je nach Bit-Version des des Betriebssystems erstellen
ln -sf 32_fcpci-lib.o fcpci-lib.o
Erstellen der dkms.conf mit folgenden Inhalt:
vi /usr/src/fritz-fcpci-2.6.31/dkms.conf
PACKAGE_NAME=fcpci PACKAGE_VERSION=2.6.31 DEST_MODULE_LOCATION=/extra BUILT_MODULE_NAME=fcpci BUILT_MODULE_LOCATION=fcpci_src/ MAKE="'make' -C fcpci_src/ all" CLEAN="'make' -C fcpci_src/ clean" AUTOINSTALL="yes"
Link setzen
ln -s /usr/src/fritz-fcpci-2.6.31/ /usr/src/fcpci-2.6.31
Kompilieren von fcpci vorbereiten
dkms add -m fcpci -v 2.6.31
Kompilierungsvorgang starten
dkms build -m fcpci -v 2.6.31
Kernelmodul installieren
dkms install -m fcpci -v 2.6.31
Konfiguration
CAPI einrichten
Dazu die Datei /etc/isdn/capi.conf mit Root-Rechten bearbeiten und die Fritz!Card PCI (fcpci) durch Entfernen des Zeichens # am Zeilenanfang aktivieren:
# card file proto io irq mem cardnr options fcpci - - - - - - #b1isa b1.t4 DSS1 0x150 7 - - P2P #b1pci b1.t4 DSS1 - - - - ...
Unter neueren Ubuntu-Versionen wird die FRITZ!Card PCI automatisch erkannt. Ein manuelles Editieren der /etc/isdn/capi.conf ist nicht mehr zwingend notwendig, schadet aber auch nicht.
Kernelmodule laden
Mit einem Texteditor und Root-Rechten folgende Zeilen der Datei /etc/modules hinzufügen:
capidrv capi fcpci
Dadurch werden die notwendigen Kernelmodule beim Starten automatisch geladen (Anmerkung: unter Ubuntu 9.10 Karmic Koala muss fcpci zwingend angegeben werden, unter Ubuntu 10.04 Lucid Lynx nicht – es schadet aber auch nicht)
Funktionstest
Nach der Installation des Kernelmoduls und der Konfiguration den Rechner neu starten. Jetzt zum Test folgendes eingeben:
sudo capiinit capiinfo
Es sollte folgende Ausgabe erscheinen:
Number of Controllers : 1 Controller 1: Manufacturer: AVM GmbH CAPI Version: 2.0 Manufacturer Version: 3.11-07 (49.23) Serial Number: 1000001 BChannels: 2 Global Options: 0x00000039 internal controller supported DTMF supported Supplementary Services supported channel allocation supported (leased lines) B1 protocols support: 0x4000011f 64 kbit/s with HDLC framing 64 kbit/s bit-transparent operation V.110 asynconous operation with start/stop byte framing V.110 synconous operation with HDLC framing T.30 modem for fax group 3 Modem asyncronous operation with start/stop byte framing B2 protocols support: 0x00000b1b ISO 7776 (X.75 SLP) Transparent LAPD with Q.921 for D channel X.25 (SAPI 16) T.30 for fax group 3 ISO 7776 (X.75 SLP) with V.42bis compression V.120 asyncronous mode V.120 bit-transparent mode B3 protocols support: 0x800000bf Transparent T.90NL, T.70NL, T.90 ISO 8208 (X.25 DTE-DTE) X.25 DCE T.30 for fax group 3 T.30 for fax group 3 with extensions Modem 0100 0200 39000000 1f010040 1b0b0000 bf000080 00000000 00000000 00000000 00000000 00000000 00000000 01000001 00020000 00000000 00000000 00000000 Supplementary services support: 0x000003ff Hold / Retrieve Terminal Portability ECT 3PTY Call Forwarding Call Deflection MCID CCBS
Bitte auch darauf achten, dass 2 B-Kanäle (BChannels) erkannt werden! Ist bis hierhin alles erfolgreich verlaufen, kann man sich nun mit dem Thema Einwahl ins Internet beschäftigen.