CISCO ASA L2L VPN PSK
Accessliste anlegen
- ciscoasa(config)# access-list acl-asa-toc extended permit ip 172.18.122.0 255.255.255.0 192.168.122.0 255.255.255.0
Phase 1
ciscoasa(config)# crypto isakmp policy 10
Authentifizierung mit PSK
- ciscoasa(config-ikev1-policy)# authentication pre-share
Verschlüsselung
- ciscoasa(config-ikev1-policy)# encryption aes-256
Hash Algorithmus
- ciscoasa(config-ikev1-policy)# hash md5
Diffie-Hellmann-Gruppe
- ciscoasa(config-ikev1-policy)# group 5
Lifetime
- ciscoasa(config-ikev1-policy)# lifetime 28800
Festlegen das die IP als ID funkiert
- ciscoasa(config)# crypto isakmp identity address
isakmp auf outside interface freischalten
- ciscoasa(config)# crypto isakmp enable if-outside
Transformset festlegen
- ciscoasa(config)# crypto ipsec transform-set AES256-MD5 esp-aes-256 esp-md5-hmac
Zusammenfassen
- ciscoasa(config)# crypto map vpn-asa-toc 10 match address acl-asa-toc
PFS und Diffie-Hellman-Gruppe 5
- ciscoasa(config)# crypto map vpn-asa-toc 10 set pfs group5
Peer setzen
- ciscoasa(config)# crypto map vpn-asa-toc 10 set peer 192.168.252.5
Transformset zuordnen
- ciscoasa(config)# crypto map vpn-asa-toc 10 set ikev1 transform-set AES256-MD5
Vpn Interface freischalten
- ciscoasa(config)# crypto map vpn-asa-toc interface if-outside
Netz zu Netz Vpn
- ciscoasa(config)# tunnel-group 192.168.252.5 type ipsec-l2l
Ipsec Attribute
- ciscoasa(config)# tunnel-group 192.168.252.5 ipsec-attributes
PSK festlegen
- ciscoasa(config-tunnel-ipsec)# pre-shared-key streng-geheim
Vpn pool aus nat nehmen
Festlegen der Ausnahme
- object network no-nat
- subnet 192.168.122.0 255.255.255.0
Ausnahme anwenden
- nat (if-inside,if-outside) source static obj-lan obj-lan destination static no-nat no-nat