BananaPi

Links

• http://www.banana-pi.org/download.html
• https://blog.rotzoll.net/2013/04/raspberry-pi-wlan-access-point-einrichten-mit-realtek-8188cus-usb-wlan-adapter/
• https://bogeskov.dk/UsbAccessPoint.html
• http://forum.lemaker.org/thread-13017-1-1.html
• http://www.linux-ratgeber.de/den-raspberry-pi-als-wlan-hotspot-einrichten/
• https://docs.google.com/document/d/1ydNQTkAzff9jnPsyX-A8ldXy2XCItTvWwD_PArf_TZA/edit
• http://forum.banana-pi.org/t/setting-up-wlan0-as-an-access-point-in-bpi-r1/83

Switch

• cat /etc/network/if-pre-up.d/swconfig

#!/bin/sh
#exit 0
ifconfig eth0 up
# The swconfig port number are:
# |2|1|0|4|  |3|
swconfig dev eth0 set reset 1
swconfig dev eth0 set enable_vlan 1
swconfig dev eth0 vlan 101 set ports '3 8t'
swconfig dev eth0 vlan 102 set ports '4 0 8t'
swconfig dev eth0 vlan 103 set ports '1 2 8t'
swconfig dev eth0 set apply 1

• cat /etc/network/interfaces

source-directory /etc/network/interfaces.d
auto lo
iface lo inet loopback

auto eth0.101
iface eth0.101 inet static
        address 192.168.241.148
        netmask 255.255.248.0
        gateway 192.168.240.100

auto eth0.102
iface eth0.102 inet static
        address 172.28.6.1
        netmask 255.255.255.0

auto eth0.103
iface eth0.103 inet static
        address 10.28.6.1
        netmask 255.255.255.0

Wlan

Accesspoint

Install

• apt-get install build-essential linux-headers-$(uname -r) hostapd

Files

Download Datei:RTL8188C 8192C USB linux v4.0.2 9000.20130911.zip

• unzip RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911.zip
• cd RTL8188C_8192C_USB_linux_v4.0.2_9000.20130911/wpa_supplicant_hostapd/
• tar -xvzf wpa_supplicant_hostapd-0.8_rtw_r7475.20130812.tar.gz
• make
• sudo cp hostapd hostapd_cli /usr/local/sbin/

Edit

• cat /etc/init.d/hostapd

...
DAEMON_SBIN=/usr/local/sbin/hostapd
DAEMON_DEFS=/etc/default/hostapd
DAEMON_CONF="/etc/hostapd/hostapd.conf"
...

• cat /etc/hostapd/hostapd.conf

ssid=ERBSENSUPPE
wpa_passphrase=sysadm
ctrl_interface=/var/run/hostapd
interface=wlan0
driver=rtl871xdrv
hw_mode=g
channel=6
wpa=2
beacon_int=100
hw_mode=g
ieee80211n=1
wme_enabled=1
ht_capab=[SHORT-GI-20][SHORT-GI-40][HT40+]
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP
max_num_sta=8
wpa_group_rekey=86400

• cat /etc/network/interfaces

...
auto wlan0
iface wlan0 inet static
	address 172.18.241.1
	netmask 255.255.248.0
...